Ahuja Sound Solutions

Back

Microphones

PA UHF Wireless Microphone

Elegant & affordable high performance dual channel UHF wireless microphone available in different frequencies.
Sturdy table-top dual channel receiver with frequency display.
Separate volume control for both channels on the front panel of the receiver.
One handheld dynamic transmitter and one Bodypack transmitter, each operating on 2 × 1.5V AA pencil cells.
Separate balanced audio output from each channel through XLR connector and an unbalanced mixed output through 6.3mm (¼”) jack socket available from the receiver.
Receiver operates on 12V DC through an AC adaptor supplied along with the transmitter.
Ideal for: PA Applications... Stage & Auditoriums... Stadia... Seminar Halls... Places of Worship... Recreation Centres..

send enquiry

‹ ›

Handheld Transmitter	.
RF Output Power	10mW (Max.)
Modulation Mode	FM
Microphone Element	Dynamic, Cardioid
Frequency Response	50-15,000Hz
Power Requirement	3V (2×1.5V AA Pencil Cells)
Current Consumption	≤ 150mA
Controls	Mic ON/OFF Switch
Indication	Channel Frequency Display
Dimensions	Ø55 (L 250) mm
Weight	220g (w/o battery)
Tie-clip Transmitter	.
RF Output Power	15mW (Max.)
Modulation Mode	FM
Microphone Element	Condenser, Omnidirectional
Frequency Response	80-15,000Hz
Power Requirement	3V (2×1.5V AA Pencil Cells)
Current Consumption	≤ 130mA
Controls	ON/OFF Switch, Vol. Control
Indication	Red LED for Transmitter ON, Frequency Display
Dimensions	W67 x H32 x D95 mm
Weight	60g (w/o battery)
Receiver	.
Audio Output	Bal. 0dBu, Unbal. -10dBu
S/N Ratio	90dB
Distortion	≤1%
Frequency Response	50-15,000Hz
Power Requirement	220V-240V AC 50Hz from AC Adaptor (supplied along with)
Controls	ON/OFF Switch, Volume Control for Channel A & B
Indications	LEDs for RF & Audio Signal, Channel Frequency Display
Dimensions	W210 × H42 × D147 mm
Weight	405g

Operation Manual

2243 KB